SPARE
PARTS PRICE LIST
For a Price Quotation for the Powder Testing Center
or any other item send e-mail request to orders@kzkptc.com
We accept mail and email purchase orders. To place a credit
card order, please email us your PO and we will send you an online
Invoice. Credit card payments are handled by PayPal, all major cards
are accepted.
All stocked items are shipped within 2 business days. All
prices are net and do not include taxes (if any) or shipping. The
actual Shipping and Handling charges are calculated separately based
on the order. If desired, please include specific shipping
instructions (choice of shippers, standard or express shipping, ...).
Accessories
| Replacement Parts
| Dies
DIE DIAMETER DEPENDENT ACCESSORIES (D# = DIE DIAMETER IN MM)
R-01D
12.7 6.35 9.525 19.05
Die Cleaning Felt Pads (Pack of 10)
Pack
$11.00
R-02D
12.7 6.35 9.525 19.05
Die Calibration Aluminum Gauges Set
Set
$17.00
R-04D
12.7 6.35 9.525 19.05
Die Installation Gauge
Each
$91.00
R-18D
12.7 6.35 9.525 19.05
Die Filling Cup
Each
$402.00
R-21AD
12.7 6.35 9.525 19.05
Compact Axial Crushing Cup
Each
$298.00
R-21RD
12.7 6.35 9.525 19.05
Compact Radial Crushing Cup
Each
$298.00
R-ACSD
12.7 6.35 9.525 19.05
Accessories Set (all 6 items above)
Set
$1,117.00
R-18SD
12.7 6.35 9.525 19.05
Spare Shutter for Die Filling Cup
Each
$7.00
GENERAL REPLACEMENT PARTS
R-CAL
Checkup & Calibration Service
Full checkup, adjustments and small repairs,
calibration of all gauges
Each
Quote
R-UCB33
Control Board Upgrade for PTC-04DT
Upgrade for older PTC-04DT versions 28-32
Each
$499.00
R-UCB35
Control Board Upgrade & Installation for PTC-03DT
Board mounted inside the PTC, USB computer connection
Each
$3,258.00
R-03
Vacuum Cleaner Filter (HEPA) for new Vacuum Cleaner models (less than
30 cm tall)
Each
$67.00
R-03L
Vacuum Cleaner Filter (HEPA) for older Vacuum Cleaner models (more
than 45 cm tall)
Each
$114.00
R-09
Die Sealing Silicon Rubber Rings (Pack of 5)
Pack
$22.00
R-16
Bulk Powder Testing Fixture (without Bulk Density Cup)
Each
$535.00
R-17
Bulk Density Cup
Each
$305.00
R-20
Die Cleaning Rod
Each
$22.00
R-21CA
Cover Spacer Set (3) for Axial Crushing Cups
Set
$286.00
R-21CR
Cover for Radial Crushing Cups
Each
$225.00
R-22
Powder Spoon
Each
$55.00
R-23
Compact Tweezers
Each
$29.00
R-25
Vertical Angle Gauge
Each
$45.00
R-26
Mitutoyo Electronic Micrometer (SPC, computer adapter, cable) -
offered only with a PTC package
Each
Quote
R-29P
Ohaus Precision Scale (0.001 gram, computer adapter, cable) - offered
only with a PTC package
Each
Quote
R-30
Die's Top Heat Shield
Each
$75.00
R-32
Bearing Strip for the Top Punch
Each
$56.00
R-33
Die Filling Vibrator
Each
$55.00
R-TPH
Top Punch Handle
Each
$349.00
R-PLC
Pressing Load Cell with Tungsten Carbide Face Disk
Each
$1,759.00
R-SLC
Standard Load Cell
Each
$1,699.00
DIES, PUNCHES, ACCESSORIES
R-10D19.05-MSET
D=19.05mm Tungsten Carbide Test Die Set for PTC-04DM
TC Test Die, TC Pressing Punch, Steel Top Punch, Seals
for Punch and Die
Set
$2,232.00
R-10D12.7-MSET
D=12.7mm Tungsten Carbide Test Die Set for PTC-04DM
TC Test Die, TC Pressing Punch, TC Top Punch, Seals
for Punch and Die
Set
$2,100.00
R-10D9.525-MSET
D=9.525mm Tungsten Carbide Test Die Set for PTC-04DM
TC Test Die, TC Pressing Punch, TC Top Punch, Seals
for Punch and Die
Set
$2,072.00
R-10D6.35-MSET
D=6.35mm Tungsten Carbide Test Die Set for PTC-04DM
TC Test Die, TC Pressing Punch, TC Top Punch, Seals
for Punch and Die
Set
$2,100.00
R-10D19.05-TSET
D=19.05mm Tungsten Carbide Test Die Set for PTC-xxDT
TC Test Die, TC Pressing Punch, Steel Top Punch, Seals
for Punch and Die
Set
$2,261.00
R-10D12.7-TSET
D=12.7mm Tungsten Carbide Test Die Set for PTC-xxDT
TC Test Die, TC Pressing Punch, Steel Top Punch, Seals
for Punch and Die
Set
$2,048.00
R-10D9.525-TSET
D=9.525mm Tungsten Carbide Test Die Set for PTC-xxDT
TC Test Die, TC Pressing Punch, Steel Top Punch, Seals
for Punch and Die
Set
$2,082.00
R-10D6.35-TSET
D=6.35mm Tungsten Carbide Test Die Set for PTC-xxDT
TC Test Die, TC Pressing Punch, Steel Top Punch, Seals
for Punch and Die
Set
$2,110.00
R-10D
12.7 6.35 9.525 19.05
Tungsten Carbide Test Die
Each
$1,749.00
R-130-C350D
12.7 6.35 9.525 19.05
Steel Die Cylinder: C-350 Steel, up to 300C
Each
$718.00
R-130-O1D
12.7 6.35 9.525 19.05
Steel Die Cylinder: O-1 Steel, up to 200C
Each
$718.00
R-13BWRD
12.7 6.35 9.525 19.05
Pressing Punch Bronze Wire Ring
Each
$1.00
R-33D
12.7 6.35 9.525 19.05
Teflon Punch Seal
Each
$2.50
R-15H600/
120V 220V
Die Band Heater: 600W
Each
$599.00
R-15H300/
120V 220V
Die Band Heater: 300W
Each
$129.00
RD-H100S
Cold/Hot Pressing Die Mounting Set (up to 300C)
Set
$1,499.00
RD-H101S
Die Head
Each
$799.00
RD-H102D
Ceramic Insulation Disk
Each
$129.00
RD-H102B
Ceramic Insulation Bushing
Each
$211.00
RD-H103
Ceramic Insulator
Each
$207.00
RD-H104
Die Cup
Each
$149.00
R-13D12.7
Tool Steel (HSS) Pressing Punch D=12.7mm
Each
$177.00
R-13D19.05
Tool Steel (HSS) Pressing Punch D=19.05mm
Each
$155.00
R-13D6.35TC
Tungsten Carbide Pressing Punch D=6.35mm
Each
$229.00
R-13D9.525TC
Tungsten Carbide Pressing Punch D=9.525mm
Each
$201.00
R-13D12.7TC
Tungsten Carbide Pressing Punch D=12.7mm
Each
$229.00
R-13D19.05TC
Tungsten Carbide Pressing Punch D=19.05mm
Each
$291.00
R-14D6.35M
Top (Closing) Tungsten Carbide Punch For Model PTC-xxDM D=6.35mm
Each
$115.00
R-14D9.525M
Top (Closing) Tungsten Carbide Punch For Model PTC-xxDM D=9.525mm
Each
$115.00
R-14D12.7M
Top (Closing) Tungsten Carbide Punch For Model PTC-xxDM D=12.7mm
Each
$115.00
R-14D19.05M
Top (Closing) Steel Punch For Model PTC-xxDM D=19.05mm
Each
$185.00
R-14D6.35
Top (Closing) Steel Punch For Model PTC-xxDT D=6.35mm
Each
$125.00
R-14D9.525
Top (Closing) Steel Punch For Model PTC-xxDT D=9.525mm
Each
$125.00
R-14D12.7
Top (Closing) Steel Punch For Model PTC-xxDT D=12.7mm
Each
$99.00
R-14D19.05
Top (Closing) Steel Punch For Model PTC-xxDT D=19.05mm
Each
$214.00
R-15T100
Thermistor T-Sensor, up to 100C
Each
$79.00
R-15T300
Thermistor T-Sensor, 80-300C
Each
$99.00
R-15RTD
Platinum T-Sensor, up to 300C - for Model PTC04-xx
Each
$123.00
R-05
Punch Mounting Spacer (for D up to 12.7mm)
Each
$219.00
R-05A
Punch Mounting Spacer (for D=19.05mm)
Each
$219.00
About
Us | News
& Updates | The
Testing Center | Parts
List | Service |
Test
Data | Contact
Us
Tel.
443-248-1773, E-mail info@kzkptc.com
Copyright © 1999-2024 KZK
Powder Tech Corp. All rights reserved.